home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload Trio 2 / Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO / dir24 / aprs503a.zip / README.QIK < prev    next >
Text File  |  1994-05-21  |  5KB  |  81 lines

  1.                         QUICK DEMOS OF APRS
  2.  
  3. So you wanna know what this program does without reading all the README.files..
  4. The following steps give the maximum exposure with the minimum of reading.
  5.  
  6. MARATHON EVENT:  First, run APRS and use FILE-LOAD to load the MARATHON.BK file.
  7. Hit SPACE to show the position of APRS packet stations at our marathon event.
  8. Next do a FILE-REPLAY.  Select the File MARATHON.HST.  You will see
  9. the LEADER and TAIL Vehicles which were GPS equipped.  Also RUNNERS.BK/HST.
  10.  
  11. FOOTBALL RUN:  To see the Army/Navy game football run from Annapolis to Philly,
  12. load FBALL.BK, and then REPLAY the FBALL.hst file.  During replay, you can
  13. Re-center the screen with the HOME key and zoom in/out with Pg keys.  To speed
  14. up replay, hit (F)ast.  FBALL93.hst is this years run.
  15.  
  16. AUTOMATIC DOPPLER DF:  To see a great demonstration of the N7LUE automatic
  17. Doppler DF interface to APRS, replay the AUTODF.HST file.  It shows what the
  18. APRS screen looks like as the DF radio is tuned to each of three on the air
  19. signals in Phoenix AZ.  To see a manual DFing event, load FOXDF.BK and then
  20. REPLAY FOXDF.HST.
  21.  
  22. HF TRACKING:  To see the capability of APRS for tracking mobile units, replay
  23. the Naval Academy boats 93BLOCK1.HST file.  Or replay my trip to Alabama over
  24. XMAS93.HST.  To see the number of stations on our HF tracking frequency, use
  25. FILE-LOAD to load the HF10151.BK file.
  26.  
  27. SPACE AX.25 DIGI's:  See README.SAT for info on using APRS for plotting
  28. satellite DX contacts and how to replay the SHUTTLE.HST demonstration.
  29.  
  30. CHANNEL MONITORNG:  Zero memory with FILE-ZERO command.  Tune your radio to
  31. an active packet channel and monitor for 10 minutes.  Select the LATEST
  32. display, and you will see all UI frames (BEACONS) on the channel.  If you know
  33. where these stations are, insert them onto the map and save the file.  Rename
  34. the file to include the frequency for later recall.  If no one is beaconing,
  35. and you get impatient, you can turn off the beacon-Only filter by hitting the
  36. CONTROLS-OTHER command.  Then ALL packets will be collected.
  37.  
  38. LOCAL AREA:  To see our local APRS net, load the FREQ579.BK file.  Zoom in to
  39. my location and see my neighborhood streets.  I drew that map using 1200 pixels
  40. per degree.  To see if your area is covered by an existing detail map, PgUp to
  41. the USA map and select the MAP-BORDERS command.  The outlines of all existing
  42. maps will be shown.  Move cursor to your area and zoom in (PgDwn) to within
  43. one of these maps.  To move long distances, CTRL-PgUp to large scale map, move
  44. to your area and then Ctrl-PgDn.  Have a friend place his LAT/LONG in his TNC
  45. BText as follows:    BText !DDMM.xxN/DDDmm.xxW/Comments...  You will see him
  46. appear on your map!  He can also just use his Grid Square enclosed in Brackets
  47. [GRidsq] at the start of his BText.  Better yet, give him a copy of APRS and
  48. Add objects locations to your screens by moving the cursor and using the INPUT-
  49. ADD command.  Similarly you may broadcast text back and forth by altering your
  50. BText using the B command or Send individual messages using S.  Registered
  51. (validated) users can save a CONFIG file so that the program starts up on their
  52. preferred map each time.  If you are Un-registered, you can save a backup file
  53. of your screen and reload this backup file each time you start up to restore
  54. your screen and location.  Better yet, register your copy of APRS and get a
  55. validation number so you can save a config file.
  56.  
  57. OTHER IDEAS AND APPLICATIONS:  See README.WX for using APRS in a weather
  58. reporting net.  APRS supports an optional home weather station serial
  59. input to make your station automatically include WX conditions in your position
  60. report.  See README.DF for triangulation in fox hunting, and README.SAT
  61. for displaying satellite beacons.  Or README.HF and come join us on the APRS
  62. HF Boater and RV tracking net.  Finally, read the full system documentation
  63. in README.APR, and start drawing local maps as described in README.MAP.  There
  64. is a chess board map in the middle of the Gulf of Mexico at 25N 90W (below 64
  65. mile scale) to show the flexibility of APRS to use any maps for any purpose.
  66. Play chess on the air using APRS!
  67.  
  68. NOW WHAT?!   APRS is a human communications tool.  Try APRS during weekly
  69. emergency exercises or events when humans are at their stations.  Find a two
  70. meter freq that is not saturated with BBS's and start an APRS network.  In the
  71. Wash/Balto area we are using 145.79.  Please consider using this freq in your
  72. area to help us build a nationwide mobile tracking network.  Encourage periodic
  73. reporting weather nodes (not the store-and-dump kind) and keyboard QSO's to
  74. also join your frequency.  Anyone with low duty cycle data is welcome, but
  75. BBS's, file forwarding, TheNET and databases should operate elsewhere!  This
  76. is NOT meant to be discriminatory, it just optimizes the frequency for the
  77. maximum number of individual real-time users.  This is best for all HAMS if
  78. there is a frequency where human operators can communicate in real-time and not
  79. only exchange text, but also see the instantaneous network topology.
  80.  
  81.